Bus/Truck lift ,20T (AA-MCL5.0TX4 )

ITEM NO.: (AA-MCL5.0TX4 )
DESC:
Packed Size:
Color:
Voltage:
Quantity:

Description

AA-MCL5.0TX4

Bus/Truck lift

1. Item No.: AA4C AA-MCL5.0-5.5-7.5-10.0-4 /6 Combined mobile version truck/bus lift

Combined mobile auto lift is ideal repair machine for lots kind of bus, container truck,big vehiles.Traditional repairing is always under the flush , not convinent, very hot in summer, small working space ,let the working effeciceny very low. Now you only need flat floor and power source, our lift could raise very heavey vehiles. Operator or repairing staff could working under the car very easy. Improved the working envoiroment and the working effeciency also.

2. Main spec：

a) Mechanical and electronical part

Lifing capacity:	5000 kg -7500kg
Max lifting height	~1550 mm
Vehicle length	No limit
Vehicle width	No limit
Min height of vehicle	＞170mm
Suitable tyre	5.0T:Dia 1200mm-900mm 7.5T:Dia 1200mm-900mm (there has optional part for small tyres)
Lifting speed	0.6m/min
Down speed	0.6m/min
Weight for 1 column	5T (~580kg) 5.5T (~600kg) 7.5T~(~780kg)
Noise	<60 d B(一)/m
Overal size of column	5T（1120×1100×2600mm） 7.5T（1150×1150×2600mm）
Temp for working enviroment	-5 ℃/+40℃
Working enviroment	Both inside&outside, better inside
Operation requirement	After cutting off the electrical power,then then take off the aviation plug on the control panel.
Lock system	Composed by copper screw,and security screw, Flap linkage institutions,working copper screw wear and tear automatic stop
Maintenacen Requirement	The lubrication of the copper screw and main axle is Mobile XHP-222.
Power requirement	4 post is 12KW,breaker is 40A;6 posts is 18KW, breaker is 60A.

Every wire( connected with power cabint) is 10core or 13 core cable( Driving wire and signal control wire included).Any part have problem, the control system will stop whole unit to aovid 1 post stoped, but other 3 posts keep working.

b) Mechanical part:

If the main copper screw( for load the vehicle) is broken ,not only there has mechanical safety,but also have protection for the control panel.At this time, the lift is stop for maintenance to make sure safety .

3. Features

Every post have control system(No matter 4 posts, or 6 posts) to make sure 4/6 posts go up/down simultaneously.And also can go down separatedly to adjust the height freely.As the control box is installed on the post ,not in one cabint,so it is easy to move and operate.

4. Specifications of power unit (1 post)

Des

AA-MCL5.0-7.5

Motor

3phase

Power PH

3kW

Voltage

380V 3 ph.+ /- 5%

Current

6.8A

Frequency

50 Hz

Phase connecting way

Rotate speed

1430 r/min

insulation grade

IP44 B grade

5.Main component list

No.	Dec	Item No.	Place of origin
QS	On/off button	GLD11-40A	Leqing ,Zhejiang
QF	Breaker	DZ47-60-40A
KJ	Phase protection	Produce by ourself	Produce by ourself
TC	Transformer	NDK(BK)-100	CHINT
KM	A/C contactor	CJX1-9/22	CHINT
SB	Button	NP2-BA45	CHINT
SQ	Limited switch	YBLX-ME/8104	CHINT
KA	Relay	NT90TPNCE220CB	CHINT
M	Motor	Y100L2-4
	Axle	Produce by ourself
	Copper screw	Produce by ourself
	Speed decreader	WPWDK