Back Cantilever PSH

ITEM NO.: PSH
DESC:
Packed Size:
Color:
Voltage:
Quantity:

Description

PSH Back Cantilever

Work Principle
PSH2 Cantilever has only 2 columns at the back side, the pallet is held by two dragging arms. Usually, it is fixed with the back wall.
It has 2 levels up and down. The car in the down layer may park directly in and out and it can move left and right. The top layer
space may fall to the ground going in and out freely after the down layer spares the space.

Characteristics
Save land area and take full use of the space. It can be set in groups layout to raise the number of parking cars. It is easy to move
and easy to install flexibly. It is convenient and reliable for operation.

Technical Parameters

Size of car (L×W×H)		5000mm×2100mm×1600mm
Weight of car		2000kg
Lifting Structure	Motor power	2.2kw
	Lifting speed	5.6m/min
	Lifting time	18s
Slide Structure	Motor power	0.2kw
	Sliding speed	8m/min
	Sliding time	20s
Power		AC380V 50HZ 3 phase 5 wires system
Safety protection device		Fixed anti-fall frame
Warning devices		Sound, light, electricity
Malfunction indication		Fault diagnosis by computer, liquid crystal display
Frame composition		Columns and beams are made of H type steel, Channel steel, angle steel and square pipes;
Parts appearance treatment		Galvanized treatment and high-grade anti-corrosion paint
Modes of operation		LCD/ IC card/Manual
Controller		PLC
Way of parking in and out		Forwarding, reversing into the space

Search

Product Categories

Back Cantilever PSH

Description