40HC top open container spray booth AA-CTSB40 Container Spray Booth Hail Damage Repair Booth Car Protable Paint Booth Quick Repair
Project Name:Container Spray Booth
Container Spray Booth Specification
PG-2023100061-01
Room size
Inner dimension
6900×4000 ×2 200 (L × W ×
H)
External dimensions
9250×4200×3050 (L×W×H)
Room body
House structure
The entire room is divided into 4 parts, namely room A, room
B, static pressure chamber, and exhaust system; room A and room B are shipped
as a whole and assembled on site;
2. Separate by a wall panel in the middle, with a spray
painting room in the front and a cabinet in the back room;
3. The frames of House A and House B are welded with square
tubes, the overall welding is firm, and the exterior wall panels are
enclosed;
4. The wall panel is made of 75 mm thick, δ= 0.4mm inside and
outside color steel plate, socket type , inner filling : rock wool,
5. The top plate is made of high-quality galvanized sheet with
δ=0.8 and is made by bending;
6. The platform system is welded together with the house body.
The platform is 250mm high and has a full-floor grille. The grille is made of 30*4 flat steel
with a galvanized
surface. It is equipped with 2 ramps. Size: 2 000 × 900 × 3 00 ; Material: anti-skid pattern plate;
surface galvanized
7. The frame of the room is made of
galvanized steel plate.
Front door
structure
Manual folding galvanized sheet powder-coated edge
door, 3 door leaves , made of δ=0.4mm color
steel plate inside and outside , thickness 7.5mm , inner filling : PU wall
panel, equipped with standard door tempered glass observation window, door Comes with pressure lock and door handle
form
Side access
quantity
Door opening size: 3000 ×
2 2 00 mm (W × H), 1 set in total;
Safety work door
structure
It adopts aluminum
alloy/galvanized sheet powder-coated edge frame structure, equipped with
tempered glass observation window and pressure lock device to ensure pressure
relief when the indoor positive pressure is too high.
quantity
Door leaf size: 800 ×
1800mm (W × H),Quantity: 1 set in total
Air
supply system
Cabinet
The frame is
welded with 50 molding materials, with δ=0.8 mm galvanized
steel panels inside and outside, rock wool insulation material is filled in
the middle, and the exterior is spray-painted;
Fan parameters
BZB series turbine blower,
model: BZB-710 , air volume: 25000 m³/h, total pressure: 600 Pa,
Motor parameters
Power: 7.5KW ,
number of poles: 6 poles ,
transfer method
Motor direct drive
quantity
7.5 KW per group , 1
group in total, total air supply volume: 25000m³/h,
noise
≤85dB _ _
Exhaust
system
Cabinet
The frame is
welded with 50 molding materials, with δ=0.8 mm galvanized
steel panels inside and outside, rock wool insulation material is filled in
the middle, and the exterior is spray-painted;
Fan parameters
BZB series turbine blower,
model: BZB-710 , air volume: 25000 m³/h, total pressure: 600 Pa,
Motor parameters
Power: 7.5KW ,
number of poles: 6 poles ,
transfer method
Motor direct drive
quantity
Each group is 7.5 KW, 1
group in total, total exhaust volume: 25000m³/h,
noise
≤85dB _ _
Lighting
system
top lighting
8 groups × 4 pcs
= 32 pcs × 18 W, LED lamp;
Installation method
45° on both sides
Glass
Lighting lamp with 4.0mm
tempered glass
light box form
standard
parameter
Illumination ≥ 800LUX ;
Total power: 576 W
filtering
system
Inlet air filter
G3 grade primary filter
bag, filtering out dust above 10μm
top filter
F5 filter cotton B TO B- 560G , filters out dust above 5μm
Return air filtration
Glass fiber filter cotton
(floor cotton)
Exhaust gas treatment
Activated carbon filter
bag
air
duct
Material
The air duct is made of
bent galvanized sheet with δ=0.8 , and both ends are connected with mold
flanges.
Made of 1Gr18Ni9Ti
stainless steel (SUS304), δ=1.2mm , equipped
with a standard double-layer furnace, made of double-layer heat exchange
stainless steel tubes;
The pneumatic damper performs internal
and external circulation conversion,
quantity
1 set in total, maximum calorific value: 180,000 Kcal/h;
smoke tube
Equipped with 4 straight
pipes and 2 elbows , made of δ=0.8mm galvanized sheet.
Electronic
control system
Material
Knob control, main
components adopt Schneider brand ;
Control System
The air supply and exhaust
adopt standard Y/△
Function
Spray painting, heating
spray painting, baking paint, lighting, emergency stop switch, fault alarm,
accumulated time, temperature limiter, paint
delayed stop protection, motor overload and over-current protection, fan and
heating system interlock, etc.
