Pneumatic Vehicle Spring disaseembler  AA-QT1500

A shock spring dismantler is a tool used to compress shock absorber springs when replacing or servicing shock absorbers on a car or other vehicle. It consists of a threaded rod and two clamping cups that grip the spring coils. The threaded rod is turned with a ratchet or other tool, which exerts force on the spring and compresses it. This allows the shock absorber to be removed or installed safely.

When using a shock spring dismantler, it's important to follow the manufacturer's instructions carefully and to observe all safety precautions. Compression of the spring generates a lot of potentially dangerous energy, which can cause injury if the tool is not used properly.

This product is suitable for cars, SUVs, vans, pickup trucks and so on
The disassembly and assembly of the strut damping spring. With strong versatility,
Easy to operate, safe and reliable. It is equipped with cylinders of 150mm diameter
And other pneumatic components powered by compressed gas and operated by only one person
You can remove and install the shock absorbers quickly and easily.

Technical parameters:
① Cylinder compression force: ≤1500Kg;
② Spring wire diameter: ≤16mm;
The maximum stroke of the cylinder: 200mm;

Native features: group is equipped with upper and lower jaw, jaw according to spring spacing can be fine-tuning level Angle, when the jaw stuck springs at both ends up and down, on the right foot valve spring to compression, compression to the spring and pillar completely release, foot from the pedal, a compact pillar or replace spring can replace or change the top part.

Matters needing attention:
The oil cup of the air source processor must be filled with white oil at a height of 3/4, and the filter cup must be drained regularly to protect the cylinder and foot valve. The air pressure into the cylinder should be less than or equal to 8kg.
Step on the right foot valve to rise (spring compression), step on the left foot valve to fall (spring stretching).
(3) When clamping the shock absorber, the iron hook and chain must be placed well at the same time before the machine can be tested, and the foot should be gently stepped on the air control valve.
④ When working, children or miscellaneous personnel should be avoided near the machine. Operators should always pay attention to safety.